DODGE
Step1: Use the Chart below to find your application.
1 1988 and newer half ton petrol trucks may have either a
Chrysler 9.25" or Dana 60. Check spline count.
2 Pre-1997 8.25"
axle assemblies with 27 spline axle shafts will accept newer,
stronger 29 spline shafts if RD93 is used.
3 See performance
section of this guide for non-standard upgrade model(s) available
for this application.
4 Newer OEM Chrysler 8.25" and Dana 44
ring gears may have 7/16" bolts. Air Locker flange holes must
be drilled or reamed larger to suit.
5 Available 2009.
6
Several axle shaft variants were used. Verify spline count prior
to ordering.
Step2: Enter the corresponding Part Number (Example:"RD116") below.